What Happens After a Boil Water Notice Is Lifted — and Why Flushing Matters

Advertisement — New Report continues below

Concerned About Your Water Quality? You’re Not Alone.

Recent headlines and viral test results have more families questioning what’s coming out of their taps. Even if your water looks clear and tastes fine, it can still carry PFAS chemicals, chlorine byproducts, heavy metals, and other contaminants — often within legal limits, but still worth a second look.

The good news? There are trusted filtration systems designed to tackle exactly these concerns — improving water safety, taste, and peace of mind.

Smart Solutions for Safer Drinking Water:

✅ Targets harmful contaminants with advanced filtration

✅ Lab-tested and trusted for household use

✅ Options for every need — from under-sink units to full-home systems

Prefer no installation? Check out the A2 Countertop System

Disclaimer:
This advert contains affiliate links. If you buy through these links, we may earn a commission at no extra cost to you.

When a boil water notice is lifted, relief is usually the first reaction. The disruption is over, routines can return to normal, and the tap is once again considered safe for everyday use.

But for many households, one quiet question lingers: Is there anything I should do now that the notice has ended?

In most cases, the answer is simple — and reassuring — but understanding what happens behind the scenes helps explain why utilities often recommend flushing taps before fully resuming normal use.


What it actually means when a notice is lifted

Boil water notices are lifted only after water system conditions have stabilized and required testing confirms results meet regulatory standards. Utilities typically restore normal pressure, flush parts of the system, and collect follow-up samples before issuing an all-clear.

When officials announce that a notice has ended, it means the water meets safety requirements for consumption based on the testing performed. It does not mean the system instantly resets everywhere at once. Water can sit in household plumbing for hours or days, especially in buildings that weren’t heavily used during the advisory period.

That’s where flushing comes in.


Why flushing taps is often recommended

Flushing taps after a notice is lifted is less about correcting a problem and more about clearing out stagnant water that may have been sitting in household pipes.

During a boil water notice, many people stop using their taps except when necessary. This allows water to remain still in interior plumbing. Running taps for a short period helps draw fresh, treated water from the main into the home.

In some situations, utilities may also have temporarily increased disinfectant levels during system recovery. Flushing helps normalize taste and odor by clearing out water that was present during that adjustment phase.


What flushing does — and what it doesn’t

Flushing taps is not a safety test, and it isn’t meant to “fix” contamination. By the time a notice is lifted, water quality testing has already been completed at the system level.

Instead, flushing:

  • Replaces stagnant water with fresh water from the distribution system
  • Helps reduce temporary taste or odor changes
  • Clears air or minor discoloration caused by pressure restoration

It does not:

  • Remove contaminants that haven’t been confirmed present
  • Change water quality beyond normal household plumbing effects

This distinction is important. Flushing is a finishing step, not a safety requirement.


How long flushing usually takes

In most homes, running cold water taps for several minutes is sufficient. Some utilities suggest starting with the tap closest to where water enters the home and working outward, though exact guidance can vary.

Hot water systems may take longer to refresh because water heaters store larger volumes. In those cases, normal use over the next day or two typically clears remaining water without any special action.

If a utility issues specific instructions, those should always take priority.


Why water may taste or smell different at first

It’s common for residents to notice slight changes in taste or smell immediately after a notice ends. This can be related to:

  • System flushing during repairs
  • Temporary disinfectant adjustments
  • Air introduced into pipes during pressure changes

These effects are usually short-lived and fade as normal water movement resumes. If changes persist beyond a reasonable period, utilities encourage residents to report them so they can be checked.


What this says about the water system overall

Boil water notices can feel alarming, but the steps that follow them — testing, lifting advisories, and recommending flushing — reflect a conservative approach to public health.

Agencies such as the Environmental Protection Agency and Centers for Disease Control and Prevention emphasize layered protections: monitoring, precautionary advisories when conditions change, and confirmation before returning to normal use.

Flushing taps after a notice fits into that same cautious framework.


Returning to normal use with confidence

Once a boil water notice is lifted and any recommended flushing is completed, residents can return to normal water use for drinking, cooking, and daily activities.

For most households, this transition is uneventful. The system stabilizes, routines resume, and the notice becomes a brief interruption rather than a lasting concern.

Understanding why flushing is suggested — and what it actually does — helps turn a confusing moment into a straightforward one.


Sources & Notes

This article is for general informational purposes only. Residents should always follow guidance issued by their local water utility or public health officials.

Check your water now!

We have translated and compiled water reports on every state in the US, and covered over 100 cities. Find out how good your water is today!

Glass of clean water

Please read – our information

The information presented on cleanairandwater.net is compiled from official water quality reports, trusted news sources, government websites, and public health resources. While we strive for accuracy and thoroughness in our presentations, we are not scientists, engineers, or qualified water quality professionals.


Our mission is to present water quality information in an accessible, real-world format that helps people understand what’s in their water and make informed decisions about their health and safety. We believe that complex environmental information should be available to everyone in a format that’s easy to understand.


We make every effort to ensure our content is current and accurate, but we cannot guarantee that all information is complete or error-free. This website should not replace official communications from your local water utility or health department. We always recommend consulting official sources for the most up-to-date information regarding your specific water system.


Clean Air and Water is not liable for any unintentional errors, omissions, or outdated information. The content on this site is provided for informational purposes only and should not be considered professional advice.

Site Logo for menu